Probleme mit DVBSky s952 und TVHeadend

Sunsheep

Moin Moin und Hallo,
ich bin mit meinen Latein am Ende und ersuche Eure Hilfe zur Lösung meines Problems.

Ich habe mir auf Basis eines AsRock Q1900 Boards und Openelec einen kleinen HTPC zusammen gebastelt - bzw. ich bin noch dabei
Nun wollte ich, mit der besagten TV Karte und TVHeadend, Live TV auf den Bildschirm werfen - klappt allerdings nicht so ganz. Die Karte wird manchmal erkannt, meistens aber eher nicht. Sagt mir zumindest das Backend. Im Log wird sie erkannt, soweit ich das zumindest deuten kann .

Hier mal der Log nach dem starten:

Code

[    5.230522] SMI PCIe driver detected: DVBSky S952 V3
[    5.286615] sound hdaudioC0D0: autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[    5.286623] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.286627] sound hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    5.286630] sound hdaudioC0D0:    mono: mono_out=0x0
[    5.286633] sound hdaudioC0D0:    dig-out=0x1e/0x0
[    5.286635] sound hdaudioC0D0:    inputs:
[    5.286640] sound hdaudioC0D0:      Front Mic=0x19
[    5.286644] sound hdaudioC0D0:      Rear Mic=0x18
[    5.286647] sound hdaudioC0D0:      Line=0x1a
[    5.297088] DVB: registering new adapter (SMI_DVB)
[    5.364714] RS6000 chip, demod id=e8, version=a1.
[    5.379189] RS6000 chip, tuner id=64.
[    5.384072] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input11
[    5.384647] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    5.384760] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    5.384881] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    5.385003] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    5.385119] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    5.385231] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    5.385339] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[    5.428400] r8169 0000:03:00.0 eth0: link down
[    5.428422] r8169 0000:03:00.0 eth0: link down
[    5.429591] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.524103] dvbsky_m88rs6000_load_firmware: Waiting for firmware upload (dvb-fe-rs6000.fw)...
[    5.526562] dvbsky_m88rs6000_load_firmware: Waiting for firmware upload(2)...
[    5.867572] random: nonblocking pool is initialized
[    8.108581] r8169 0000:03:00.0 eth0: link up
[    8.108599] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    8.219970] DVBSky SMI PCIe driver 0000:01:00.0: DVB: registering adapter 0 frontend 0 (Montage RS6000(DVBSky))...
[    8.226863] DVBSky PCIe MAC= 00:18:42:54:55:52
[    8.226960] DVB: registering new adapter (SMI_DVB)
[    8.275259] RS6000 chip, demod id=e8, version=a1.
[    8.277627] RS6000 chip, tuner id=64.
[    8.405593] dvbsky_m88rs6000_load_firmware: Waiting for firmware upload (dvb-fe-rs6000.fw)...
[    8.405649] dvbsky_m88rs6000_load_firmware: Waiting for firmware upload(2)...
[   11.075649] DVBSky SMI PCIe driver 0000:01:00.0: DVB: registering adapter 1 frontend 0 (Montage RS6000(DVBSky))...
[   11.082168] DVBSky PCIe MAC= 00:18:32:54:55:53
[   11.108302] Registered IR [definition='3','0']keymap[/definition] rc-dvbsky
[   11.108516] input: IR (DVBSky S952 V3) as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/rc/rc0/input19
[   11.108715] rc0: IR (DVBSky S952 V3) as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/rc/rc0
[   11.108752] DVBSky SMI PCIe driver 0000:01:00.0: irq 92 for MSI/MSI-X

Alles anzeigen

Ob TVHeadend zu schnell startet hab ich auch schon ausprobiert. Dem ist aber nicht so.

Schon mal vielen Dank im Voraus für Eure Hilfe und Mühe.

DDD

PCIe Rev1 bzw. Gen1 im Bios mal versucht einzustellen?

Sunsheep

Das hat tatsächlich kurz funktioniert. Nach einem Neustart ist die karte aber wieder nicht mehr in TVHeadend zu finden...

DDD

Rev1 / Gen1 ist aber immer noch drin?
Siehst du im Bios ob die Karte erkannt wurde? Bei den Serie7 Intel Boards gabs da glaube ich so ein Mainboard Bild wo man die Komponenten sehen konnte.

Sunsheep

Sehe es leider nicht im Bios.

Leider ist das Problem noch nicht so wirklich gelöst, aber ich habe her rausgefunden, dass TvHeadend die Karte erkennt, sobald ich es kurz einmal deaktiviere und nach ein paar Sekunden es wieder aktiviere. Nach einem Neustart ist sie wieder nicht da.

Jetzt kommt noch ein weiteres Problem hinzu:
Sobald ich einen Sendersuchlauf starte stürzt der TVHeadend Server immer wieder ab, startet sich neu und stürzt wieder ab usw..

Code

2015-03-21 12:19:07.459 HTTP: 192.168.178.45: /api/idnode/load -- 400
2015-03-21 12:23:16.000 mpegts: 12551.5V in TV - tuning on Montage RS6000(DVBSky) : DVB-S #0
2015-03-21 12:23:28.000 mpegts: 12551.5V in TV - tuning on Montage RS6000(DVBSky) : DVB-S #0
There seems to be a problem with the live update feed from Tvheadend. Trying to reconnect...
Reconnected to Tvheadend
2015-03-21 12:23:40.000 mpegts: 12551.5V in TV - tuning on Montage RS6000(DVBSky) : DVB-S #0
2015-03-21 12:23:40.234 subscription: 0001: "keep" subscribing to mux, weight: 1, adapter: "Montage RS6000(DVBSky) : DVB-S #0", network: "TV", mux: "12551.5V", hostname: "", username: "", client: ""
2015-03-21 12:23:40.234 mpegts: Montage RS6000(DVBSky) : DVB-S #0 - Montage RS6000(DVBSky) : DVB-S #0 - linked input cannot be started (All: 0)
2015-03-21 12:23:52.000 mpegts: 12551.5V in TV - tuning on Montage RS6000(DVBSky) : DVB-S #0
There seems to be a problem with the live update feed from Tvheadend. Trying to reconnect...
Reconnected to Tvheadend
2015-03-21 12:24:04.000 mpegts: 12551.5V in TV - tuning on Montage RS6000(DVBSky) : DVB-S #0
2015-03-21 12:24:04.233 subscription: 0001: "keep" subscribing to mux, weight: 1, adapter: "Montage RS6000(DVBSky) : DVB-S #0", network: "TV", mux: "12551.5V", hostname: "", username: "", client: ""
2015-03-21 12:24:04.233 mpegts: Montage RS6000(DVBSky) : DVB-S #0 - Montage RS6000(DVBSky) : DVB-S #0 - linked input cannot be started (All: 0)
2015-03-21 12:24:16.000 mpegts: 12551.5V in TV - tuning on Montage RS6000(DVBSky) : DVB-S #0
2015-03-21 12:24:16.234 subscription: 0001: "keep" subscribing to mux, weight: 1, adapter: "Montage RS6000(DVBSky) : DVB-S #0", network: "TV", mux: "12551.5V", hostname: "", username: "", client: ""
2015-03-21 12:24:16.234 mpegts: Montage RS6000(DVBSky) : DVB-S #0 - Montage RS6000(DVBSky) : DVB-S #0 - linked input cannot be started (All: 0)
2015-03-21 12:24:28.000 mpegts: 12551.5V in TV - tuning on Montage RS6000(DVBSky) : DVB-S #0
2015-03-21 12:24:28.237 subscription: 0001: "keep" subscribing to mux, weight: 1, adapter: "Montage RS6000(DVBSky) : DVB-S #0", network: "TV", mux: "12551.5V", hostname: "", username: "", client: ""
2015-03-21 12:24:28.237 mpegts: Montage RS6000(DVBSky) : DVB-S #0 - Montage RS6000(DVBSky) : DVB-S #0 - linked input cannot be started (All: 0)
2015-03-21 12:24:40.000 mpegts: 12551.5V in TV - tuning on Montage RS6000(DVBSky) : DVB-S #0
2015-03-21 12:24:40.233 subscription: 0001: "keep" subscribing to mux, weight: 1, adapter: "Montage RS6000(DVBSky) : DVB-S #0", network: "TV", mux: "12551.5V", hostname: "", username: "", client: ""
2015-03-21 12:24:40.233 mpegts: Montage RS6000(DVBSky) : DVB-S #0 - Montage RS6000(DVBSky) : DVB-S #0 - linked input cannot be started (All: 0)
2015-03-21 12:24:52.000 mpegts: 12551.5V in TV - tuning on Montage RS6000(DVBSky) : DVB-S #0
There seems to be a problem with the live update feed from Tvheadend. Trying to reconnect...
Reconnected to Tvheadend
2015-03-21 12:25:04.000 mpegts: 12551.5V in TV - tuning on Montage RS6000(DVBSky) : DVB-S #0
There seems to be a problem with the live update feed from Tvheadend. Trying to reconnect...
Reconnected to Tvheadend
2015-03-21 12:25:16.000 mpegts: 12551.5V in TV - tuning on Montage RS6000(DVBSky) : DVB-S #0
2015-03-21 12:25:16.233 subscription: 0001: "keep" subscribing to mux, weight: 1, adapter: "Montage RS6000(DVBSky) : DVB-S #0", network: "TV", mux: "12551.5V", hostname: "", username: "", client: ""
2015-03-21 12:25:16.234 mpegts: Montage RS6000(DVBSky) : DVB-S #0 - Montage RS6000(DVBSky) : DVB-S #0 - linked input cannot be started (All: 0)
2015-03-21 12:25:28.000 mpegts: 12551.5V in TV - tuning on Montage RS6000(DVBSky) : DVB-S #0
There seems to be a problem with the live update feed from Tvheadend. Trying to reconnect...
Reconnected to Tvheadend
2015-03-21 12:25:40.000 mpegts: 12551.5V in TV - tuning on Montage RS6000(DVBSky) : DVB-S #0
There seems to be a problem with the live update feed from Tvheadend. Trying to reconnect...
Reconnected to Tvheadend
2015-03-21 12:25:52.000 mpegts: 12551.5V in TV - tuning on Montage RS6000(DVBSky) : DVB-S #0
2015-03-21 12:25:52.233 subscription: 0001: "keep" subscribing to mux, weight: 1, adapter: "Montage RS6000(DVBSky) : DVB-S #0", network: "TV", mux: "12551.5V", hostname: "", username: "", client: ""
2015-03-21 12:25:52.234 mpegts: Montage RS6000(DVBSky) : DVB-S #0 - Montage RS6000(DVBSky) : DVB-S #0 - linked input cannot be started (All: 0)
2015-03-21 12:26:04.000 mpegts: 12551.5V in TV - tuning on Montage RS6000(DVBSky) : DVB-S #0
There seems to be a problem with the live update feed from Tvheadend. Trying to reconnect...
Reconnected to Tvheadend
2015-03-21 12:26:16.000 mpegts: 12551.5V in TV - tuning on Montage RS6000(DVBSky) : DVB-S #0
There seems to be a problem with the live update feed from Tvheadend. Trying to reconnect...
Reconnected to Tvheadend

Alles anzeigen

Danke nochmal für deine Hilfe.

Jetzt mitmachen!