################################################################################ # ... output of dmesg # LibreELEC release: RPi2.arm-devel-20160527210329-#0527-g454d0a5 # LibreELEC git: 454d0a540a0becce2c686ee4b1f72e7462ba03ae ################################################################################ [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.6.0 (openelec.tv@nmacleod.com) (gcc version 5.3.0 (GCC) ) #1 SMP Fri May 27 21:05:19 BST 2016 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2 [ 0.000000] cma: Reserved 8 MiB at 0x2e400000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 192512 [ 0.000000] free_area_init_node: node 0, pgdat 80c325c0, node_mem_map add64000 [ 0.000000] Normal zone: 1692 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 192512 pages, LIFO batch:31 [ 0.000000] [bcm2709_smp_init_cpus] enter (1014c0->f3003010) [ 0.000000] [bcm2709_smp_init_cpus] ncores=4 [ 0.000000] percpu: Embedded 12 pages/cpu @aefaf000 s18188 r8192 d22772 u49152 [ 0.000000] pcpu-alloc: s18188 r8192 d22772 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 190820 [ 0.000000] Kernel command line: root=/dev/ram0 rdinit=/init BOOT_IMAGE=/kernel.img usbcore.autosuspend=-1 8250.nr_uarts=0 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2709.boardrev=0xa02082 bcm2709.serial=0x7c2a2f74 smsc95xx.macaddr=B8:27:EB:2A:2F:74 bcm2708_fb.fbswap=1 bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 742100K/770048K available (6148K kernel code, 206K rwdata, 1472K rodata, 3072K init, 394K bss, 19756K reserved, 8192K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xaf800000 - 0xff800000 (1280 MB) [ 0.000000] lowmem : 0x80000000 - 0xaf000000 ( 752 MB) [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB) [ 0.000000] .text : 0x80008000 - 0x80871004 (8613 kB) [ 0.000000] .init : 0x80900000 - 0x80c00000 (3072 kB) [ 0.000000] .data : 0x80c00000 - 0x80c33ac0 ( 207 kB) [ 0.000000] .bss : 0x80c35000 - 0x80c97a04 ( 395 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000009] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000024] Switching to timer-based delay loop, resolution 52ns [ 0.000194] Console: colour dummy device 80x30 [ 0.000362] console [tty0] enabled [ 0.000383] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000) [ 0.000400] pid_max: default: 32768 minimum: 301 [ 0.000557] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000570] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001386] Disabling cpuset control group subsystem [ 0.001479] CPU: Testing write buffer coherency: ok [ 0.001914] CPU0: update cpu_capacity 1024 [ 0.001926] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002016] Setting up static identity map for 0x100000 - 0x100034 [ 0.003854] CPU1: update cpu_capacity 1024 [ 0.003861] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.004436] CPU2: update cpu_capacity 1024 [ 0.004442] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.004992] CPU3: update cpu_capacity 1024 [ 0.004998] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.005068] Brought up 4 CPUs [ 0.005101] SMP: Total of 4 processors activated (153.00 BogoMIPS). [ 0.005109] CPU: All CPU(s) started in HYP mode. [ 0.005115] CPU: Virtualization extensions available. [ 0.005668] devtmpfs: initialized [ 0.014657] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ 0.014844] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.015375] pinctrl core: initialized pinctrl subsystem [ 0.015947] NET: Registered protocol family 16 [ 0.021067] DMA: preallocated 4096 KiB pool for atomic coherent allocations [ 0.030027] cpuidle: using governor ladder [ 0.040046] cpuidle: using governor menu [ 0.044308] Serial: AMBA PL011 UART driver [ 0.044426] uart-pl011 3f201000.uart: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe [ 0.044571] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.087791] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x1 [ 0.088929] SCSI subsystem initialized [ 0.089238] usbcore: registered new interface driver usbfs [ 0.089318] usbcore: registered new interface driver hub [ 0.089403] usbcore: registered new device driver usb [ 0.090261] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-05-20 19:05 [ 0.117361] clocksource: Switched to clocksource arch_sys_counter [ 0.125556] NET: Registered protocol family 2 [ 0.126231] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.126358] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.126545] TCP: Hash tables configured (established 8192 bind 8192) [ 0.126635] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.126681] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.126891] NET: Registered protocol family 1 [ 0.127159] RPC: Registered named UNIX socket transport module. [ 0.127168] RPC: Registered udp transport module. [ 0.127176] RPC: Registered tcp transport module. [ 0.127183] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.273378] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.273847] workingset: timestamp_bits=13 max_order=18 bucket_order=5 [ 0.287979] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.290213] NFS: Registering the id_resolver key type [ 0.290261] Key type id_resolver registered [ 0.290270] Key type id_legacy registered [ 0.290296] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.293998] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.294063] io scheduler noop registered (default) [ 0.294081] io scheduler deadline registered [ 0.294125] io scheduler cfq registered [ 0.296792] BCM2708FB: allocated DMA memory ee800000 [ 0.296816] BCM2708FB: allocated DMA channel 0 @ f3007000 [ 0.323172] Console: switching to colour frame buffer device 228x61 [ 1.356256] bcm2835-rng 3f104000.rng: hwrng registered [ 1.356440] vc-cma: Videocore CMA driver [ 1.356450] vc-cma: vc_cma_base = 0x00000000 [ 1.356458] vc-cma: vc_cma_size = 0x00000000 (0 MiB) [ 1.356466] vc-cma: vc_cma_initial = 0x00000000 (0 MiB) [ 1.356667] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB) [ 1.368451] brd: module loaded [ 1.368582] loop: module loaded [ 1.370505] nbd: registered device at major 43 [ 1.378388] vchiq: vchiq_init_state: slot_zero = 0xae880000, is_master = 0 [ 1.379917] usbcore: registered new interface driver rtsx_usb [ 1.379935] Loading iSCSI transport class v2.0-870. [ 1.380316] iscsi: registered transport (tcp) [ 1.380595] tun: Universal TUN/TAP device driver, 1.6 [ 1.380603] tun: (C) 1999-2004 Max Krasnyansky [ 1.380856] usbcore: registered new interface driver dm9601 [ 1.380953] usbcore: registered new interface driver smsc95xx [ 1.381021] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.581240] Core Release: 2.80a [ 1.581251] Setting default values for core params [ 1.581279] Finished setting default values for core params [ 1.781627] Using Buffer DMA mode [ 1.781636] Periodic Transfer Interrupt Enhancement - disabled [ 1.781644] Multiprocessor Interrupt Enhancement - disabled [ 1.781652] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 1.781670] Dedicated Tx FIFOs mode [ 1.781916] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xae814000 dma = 0xee814000 len=9024 [ 1.781945] FIQ FSM acceleration enabled for : [ 1.781945] Non-periodic Split Transactions [ 1.781945] Periodic Split Transactions [ 1.781945] High-Speed Isochronous Endpoints [ 1.781945] Interrupt/Control Split Transaction hack enabled [ 1.781977] dwc_otg: Microframe scheduler enabled [ 1.782036] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x804e964c [ 1.782049] WARN::hcd_init_fiq:414: FIQ ASM at 0x804e99b0 length 36 [ 1.782063] WARN::hcd_init_fiq:439: MPHI regs_base at 0xb0682000 [ 1.782116] dwc_otg 3f980000.usb: DWC OTG Controller [ 1.782152] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 1.782184] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000 [ 1.782232] Init: Port Power? op_state=1 [ 1.782239] Init: Power Port (0) [ 1.782405] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.782419] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.782430] usb usb1: Product: DWC OTG Controller [ 1.782441] usb usb1: Manufacturer: Linux 4.6.0 dwc_otg_hcd [ 1.782452] usb usb1: SerialNumber: 3f980000.usb [ 1.783083] hub 1-0:1.0: USB hub found [ 1.783119] hub 1-0:1.0: 1 port detected [ 1.783453] dwc_otg: FIQ enabled [ 1.783461] dwc_otg: NAK holdoff enabled [ 1.783468] dwc_otg: FIQ split-transaction FSM enabled [ 1.783498] Module dwc_common_port init [ 1.783654] usbcore: registered new interface driver uas [ 1.783768] usbcore: registered new interface driver usb-storage [ 1.783931] mousedev: PS/2 mouse device common for all mice [ 1.784084] i2c /dev entries driver [ 1.785072] bcm2835-cpufreq: min=600000 max=1200000 [ 1.785348] sdhci: Secure Digital Host Controller Interface driver [ 1.785356] sdhci: Copyright(c) Pierre Ossman [ 1.785621] sdhost: log_buf @ ae813000 (ee813000) [ 1.850699] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 1.872818] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0 [ 1.872825] mmc-bcm2835 3f300000.mmc: DMA channel allocated [ 1.897400] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.897565] ledtrig-cpu: registered to indicate activity on CPUs [ 1.897631] hidraw: raw HID events driver (C) Jiri Kosina [ 1.898743] usbcore: registered new interface driver usbhid [ 1.898747] usbhid: USB HID core driver [ 1.899735] NET: Registered protocol family 10 [ 1.900206] NET: Registered protocol family 17 [ 1.900267] Key type dns_resolver registered [ 1.900519] Registering SWP/SWPB emulation handler [ 1.900978] vc-sm: Videocore shared memory driver [ 1.900985] [vc_sm_connected_init]: start [ 1.901248] [vc_sm_connected_init]: end - returning 0 [ 1.906936] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2 [ 1.907313] console [netcon0] enabled [ 1.907318] netconsole: network logging started [ 1.907326] of_cfs_init [ 1.907380] of_cfs_init: OK [ 1.910252] Freeing unused kernel memory: 3072K (80900000 - 80c00000) [ 1.912573] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.915522] mmc0: new high speed SDHC card at address 1234 [ 1.915878] mmcblk0: mmc0:1234 SA16G 14.5 GiB [ 1.917143] mmcblk0: p1 p2 [ 1.924967] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 1.926493] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.928010] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.930738] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.980759] Indeed it is in host mode hprt0 = 00021501 [ 2.016936] mmc1: new high speed SDIO card at address 0001 [ 2.147394] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 2.147481] Indeed it is in host mode hprt0 = 00001101 [ 2.327617] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ 2.327634] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.328075] hub 1-1:1.0: USB hub found [ 2.328125] hub 1-1:1.0: 5 ports detected [ 2.607396] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 2.700861] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 [ 2.700874] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.703300] smsc95xx v1.0.4 [ 2.745712] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:2a:2f:74 [ 2.824070] usb 1-1.5: new low-speed USB device number 4 using dwc_otg [ 2.925636] usb 1-1.5: New USB device found, idVendor=1d57, idProduct=ad02 [ 2.925647] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.943929] input: HID 1d57:ad02 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:1D57:AD02.0001/input/input0 [ 2.994545] hid-generic 0003:1D57:AD02.0001: input,hiddev0,hidraw0: USB HID v1.10 Keyboard [HID 1d57:ad02] on usb-3f980000.usb-1.5/input0 [ 3.006879] input: HID 1d57:ad02 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:1D57:AD02.0002/input/input1 [ 3.007176] hid-generic 0003:1D57:AD02.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [HID 1d57:ad02] on usb-3f980000.usb-1.5/input1 [ 3.151699] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 3.152497] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 3.202824] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.592951] systemd[1]: System time before build time, advancing clock. [ 3.595124] random: systemd urandom read with 76 bits of entropy available [ 3.618650] systemd[1]: systemd 230 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 3.618924] systemd[1]: Detected architecture arm. [ 3.619184] systemd[1]: Set hostname to . [ 3.718525] systemd[1]: Created slice User and Session Slice. [ 3.770806] systemd[1]: Listening on udev Control Socket. [ 3.771133] systemd[1]: Created slice System Slice. [ 3.784366] systemd[1]: Starting Show Version... [ 3.784794] systemd[1]: Listening on udev Kernel Socket. [ 3.784931] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.785041] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 3.785215] systemd[1]: Listening on Journal Socket. [ 3.786711] systemd[1]: Mounting POSIX Message Queue File System... [ 3.788667] systemd[1]: Starting Mounting swapfile... [ 3.795844] systemd[1]: Starting Load Kernel Modules... [ 3.797449] systemd[1]: Starting Setup machine-id... [ 3.798043] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.799554] systemd[1]: Mounting Debug File System... [ 3.799884] systemd[1]: Reached target Slices. [ 3.802229] systemd[1]: Starting Remount Root and Kernel File Systems... [ 3.804273] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 3.805930] systemd[1]: Mounting Variable Directory... [ 3.806308] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 3.806408] systemd[1]: Reached target Paths. [ 3.809833] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 3.811974] systemd[1]: Starting Create Static Device Nodes in /dev... [ 3.819038] systemd[1]: Started Remount Root and Kernel File Systems. [ 3.824961] systemd[1]: Starting udev Coldplug all Devices... [ 3.826138] systemd[1]: Started Load Kernel Modules. [ 3.828037] systemd[1]: Mounting Configuration File System... [ 3.829993] systemd[1]: Starting Apply Kernel Variables... [ 3.913573] systemd[1]: Mounted Debug File System. [ 3.913865] systemd[1]: Mounted POSIX Message Queue File System. [ 3.913956] systemd[1]: Mounted Variable Directory. [ 3.918493] systemd[1]: Mounted Configuration File System. [ 3.919274] systemd[1]: Started Show Version. [ 3.920883] systemd[1]: Started Create Static Device Nodes in /dev. [ 3.922038] systemd[1]: Started Apply Kernel Variables. [ 3.924386] systemd[1]: Reached target Local File Systems (Pre). [ 3.944768] systemd[1]: Starting Setup Timezone data... [ 3.948016] systemd[1]: Started Setup machine-id. [ 3.955930] systemd[1]: Starting Journal Service... [ 3.958646] systemd[1]: Started Setup Timezone data. [ 4.015604] systemd[1]: Started Journal Service. [ 4.077687] systemd-journald[215]: Received request to flush runtime journal from PID 1 [ 4.450255] random: nonblocking pool is initialized [ 5.031308] Console: switching to colour dummy device 80x30 [ 5.261024] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer [ 5.301810] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 5.578780] brcmfmac: brcmf_sdio_drivestrengthinit: No SDIO Drive strength init done for chip 43430 rev 1 pmurev 24 [ 5.579087] usbcore: registered new interface driver brcmfmac [ 5.867654] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Dec 15 2015 18:10:45 version 7.45.41.23 (r606571) FWID 01-cc4eda9c [ 5.894360] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code (0x30 0x30) [ 6.954671] uart-pl011 3f201000.uart: no DMA platform data [ 7.082683] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 7.083064] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.597897] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 8.598919] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1 [ 8.616938] 8021q: 802.1Q VLAN Support v1.8 [ 13.442043] Bluetooth: Core ver 2.21 [ 13.442123] NET: Registered protocol family 31 [ 13.442132] Bluetooth: HCI device and connection manager initialized [ 13.442153] Bluetooth: HCI socket layer initialized [ 13.442166] Bluetooth: L2CAP socket layer initialized [ 13.442197] Bluetooth: SCO socket layer initialized [ 14.485550] Bluetooth: HCI UART driver ver 2.3 [ 14.485570] Bluetooth: HCI UART protocol H4 registered [ 14.485579] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 14.485739] Bluetooth: HCI UART protocol BCM registered ################################################################################ # ... output of lsmod # LibreELEC release: RPi2.arm-devel-20160527210329-#0527-g454d0a5 # LibreELEC git: 454d0a540a0becce2c686ee4b1f72e7462ba03ae ################################################################################ Module Size Used by hci_uart 14410 1 btbcm 5379 1 hci_uart bluetooth 283630 23 btbcm,hci_uart 8021q 16464 0 brcmfmac 177650 0 brcmutil 4957 1 brcmfmac cfg80211 229163 1 brcmfmac bcm2835_gpiomem 2716 0 bcm2835_wdt 2649 0 ################################################################################ # ... output of ps xa # LibreELEC release: RPi2.arm-devel-20160527210329-#0527-g454d0a5 # LibreELEC git: 454d0a540a0becce2c686ee4b1f72e7462ba03ae ################################################################################ PID USER TIME COMMAND 1 root 0:02 /usr/lib/systemd/systemd 2 root 0:00 [kthreadd] 3 root 0:00 [ksoftirqd/0] 4 root 0:00 [kworker/0:0] 5 root 0:00 [kworker/0:0H] 6 root 0:00 [kworker/u8:0] 7 root 0:00 [rcu_sched] 8 root 0:00 [rcu_bh] 9 root 0:00 [migration/0] 10 root 0:00 [watchdog/0] 11 root 0:00 [cpuhp/0] 12 root 0:00 [cpuhp/1] 13 root 0:00 [watchdog/1] 14 root 0:00 [migration/1] 15 root 0:00 [ksoftirqd/1] 16 root 0:00 [kworker/1:0] 17 root 0:00 [kworker/1:0H] 18 root 0:00 [cpuhp/2] 19 root 0:00 [watchdog/2] 20 root 0:00 [migration/2] 21 root 0:00 [ksoftirqd/2] 22 root 0:00 [kworker/2:0] 23 root 0:00 [kworker/2:0H] 24 root 0:00 [cpuhp/3] 25 root 0:00 [watchdog/3] 26 root 0:00 [migration/3] 27 root 0:00 [ksoftirqd/3] 28 root 0:00 [kworker/3:0] 29 root 0:00 [kworker/3:0H] 30 root 0:00 [kdevtmpfs] 31 root 0:00 [netns] 32 root 0:00 [oom_reaper] 33 root 0:00 [writeback] 34 root 0:00 [kcompactd0] 35 root 0:00 [crypto] 36 root 0:00 [bioset] 37 root 0:00 [kblockd] 38 root 0:00 [watchdogd] 39 root 0:00 [kworker/0:1] 40 root 0:00 [rpciod] 41 root 0:00 [kswapd0] 42 root 0:00 [vmstat] 43 root 0:00 [nfsiod] 44 root 0:00 [cifsiod] 60 root 0:00 [kworker/1:1] 61 root 0:00 [kworker/3:1] 62 root 0:00 [kworker/2:1] 63 root 0:00 [bioset] 64 root 0:00 [bioset] 65 root 0:00 [bioset] 66 root 0:00 [bioset] 67 root 0:00 [bioset] 68 root 0:00 [bioset] 69 root 0:00 [bioset] 70 root 0:00 [bioset] 71 root 0:00 [bioset] 72 root 0:00 [bioset] 73 root 0:00 [bioset] 74 root 0:00 [bioset] 75 root 0:00 [bioset] 76 root 0:00 [bioset] 77 root 0:00 [bioset] 78 root 0:00 [bioset] 79 root 0:00 [bioset] 80 root 0:00 [bioset] 81 root 0:00 [bioset] 82 root 0:00 [bioset] 83 root 0:00 [bioset] 84 root 0:00 [bioset] 85 root 0:00 [bioset] 86 root 0:00 [bioset] 87 root 0:00 [bioset] 88 root 0:00 [bioset] 89 root 0:00 [bioset] 90 root 0:00 [bioset] 91 root 0:00 [bioset] 92 root 0:00 [bioset] 93 root 0:00 [bioset] 94 root 0:00 [bioset] 95 root 0:00 [VCHIQ-0] 96 root 0:00 [VCHIQr-0] 97 root 0:00 [VCHIQs-0] 98 root 0:00 [iscsi_eh] 99 root 0:00 [dwc_otg] 100 root 0:00 [DWC Notificatio] 101 root 0:00 [irq/92-mmc1] 102 root 0:00 [ipv6_addrconf] 103 root 0:00 [kworker/3:2] 104 root 0:00 [kworker/3:3] 105 root 0:00 [VCHIQka-0] 106 root 0:00 [SMIO] 107 root 0:00 [deferwq] 108 root 0:00 [kworker/u8:1] 109 root 0:00 [bioset] 110 root 0:00 [mmcqd/0] 132 root 0:00 [kworker/2:2] 140 root 0:00 [jbd2/mmcblk0p2-] 141 root 0:00 [ext4-rsv-conver] 152 root 0:00 [bioset] 153 root 0:00 [loop0] 154 root 0:00 [kworker/3:1H] 177 root 0:00 [kworker/2:1H] 179 root 0:00 [kworker/1:1H] 183 root 0:00 [kworker/0:1H] 202 root 0:00 [kworker/u8:2] 205 root 0:00 [kworker/0:2] 215 root 0:00 /usr/lib/systemd/systemd-journald 232 root 0:00 [kworker/1:2] 242 root 0:00 /usr/lib/systemd/systemd-udevd 256 root 0:01 /usr/bin/pulseaudio --system 261 root 0:00 /usr/sbin/eventlircd -f --evmap=/etc/eventlircd.d --socket=/run/lirc/lircd --release=_UP 264 root 0:00 /usr/lib/systemd/systemd-logind 268 dbus 0:00 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation 369 root 0:00 [cfg80211] 378 root 0:00 [brcmf_wq/mmc1:0] 379 root 0:00 [brcmf_wdog/mmc1] 385 root 0:00 /usr/sbin/sshd -D 387 root 0:00 /sbin/crond -f -S 399 root 0:00 /usr/sbin/connmand -nr --config=/etc/connman/main.conf 411 avahi 0:00 avahi-daemon: running [LibreELEC.local] 448 root 0:00 /usr/bin/rpcbind 449 root 0:00 /usr/bin/wpa_supplicant -u 450 root 0:00 /usr/bin/smbd --configfile=/run/samba/smb.conf 457 root 0:00 /usr/bin/nmbd --configfile=/run/samba/smb.conf 465 root 0:00 {kodi.sh} /bin/sh /usr/lib/kodi/kodi.sh --standalone -fs --lircdev /run/lirc/lircd 470 root 0:55 /usr/lib/kodi/kodi.bin --standalone -fs --lircdev /run/lirc/lircd 483 root 0:00 [kworker/u9:0] 484 root 0:00 [hci0] 485 root 0:00 [hci0] 487 root 0:00 [kworker/u9:1] 488 root 0:00 /usr/bin/hciattach /dev/ttyAMA0 bcm43xx 921600 noflow - 490 root 0:00 [kworker/u9:2] 491 root 0:00 /usr/lib/bluetooth/bluetoothd 700 root 0:00 /usr/bin/smbd --configfile=/run/samba/smb.conf 701 root 0:00 sh -c createlog 702 root 0:00 {createlog} /bin/sh /usr/bin/createlog 732 root 0:00 ps xa ################################################################################ # ... output of cat /storage/.config/modprobe.d/disable-spdif-for-hd-audio.conf # LibreELEC release: RPi2.arm-devel-20160527210329-#0527-g454d0a5 # LibreELEC git: 454d0a540a0becce2c686ee4b1f72e7462ba03ae ################################################################################ # INTEL HBR WORKAROUND FOR DTS-MA & Dolby TrueHD PLAYBACK # Uncomment the following lines to disable any S/PDIF out to deliver # bitstreamed audio on Intel builds. This is a rough workaround for # users that have both S/PDIF and HDMI audio outputs on their motherboard # or motherboard+discrete graphics combo. # EVEN IF YOU ARE NOT USING THE S/PDIF OUTPUT # but still have one, you will need to uncomment the lines below ! # after uncommenting these lines, you must reboot for these settings to take effect # blacklist snd_hda_codec_realtek # blacklist snd_hda_codec_sigmatel # blacklist snd_hda_codec_cirrus ################################################################################ # ... output of cat /storage/.config/sysctl.d/transmission.conf # LibreELEC release: RPi2.arm-devel-20160527210329-#0527-g454d0a5 # LibreELEC git: 454d0a540a0becce2c686ee4b1f72e7462ba03ae ################################################################################ # transmission with uTP support # please comment out the follow line to activate this values: # net.core.wmem_max=1048576 # net.core.rmem_max=4194304 ################################################################################ # ... output of ls -laR /storage/.config/system.d # LibreELEC release: RPi2.arm-devel-20160527210329-#0527-g454d0a5 # LibreELEC git: 454d0a540a0becce2c686ee4b1f72e7462ba03ae ################################################################################ /storage/.config/system.d: total 37 drwxr-xr-x 2 root root 1024 May 17 06:56 . drwxr-xr-x 13 root root 1024 May 17 06:57 .. -rw-r--r-- 1 root root 28816 May 17 06:56 README -rw-r--r-- 1 root root 1772 May 17 06:56 cifs.mount.sample -rw-r--r-- 1 root root 1729 May 17 06:56 nfs.mount.sample -rw-r--r-- 1 root root 1145 May 17 06:56 openvpn.service.sample