Leider nicht. Da ist zwar die My_Station Datei, aber ohne Inhalt.
Beiträge von Arnold1961
-
-
Hallo,
ich habe drei Raspi mit Kodi Krypton 17.6 in unserem Haus bzw. Geschäft laufen. Natürlich alles klasse, bis auf die IPTV Radiolisten. Diese machen schon mal mucken. Nun habe ich das Addon - Radio.de installiert. Um mir die Arbeit zu ersparen und die Raspi immer an ein Fernsehen anzuschließen (2 Raspi's sind nur als Web-Radio im Gebrauch) such ich den Ordner "Meine Sender" (nicht Favoriten, die sind anderweitig belegt) um die Ordner zu kopieren. Weiß jemand wo diese liegen?Danke
-
mit deiner Codezeile kann ich manuell die Datei herunterladen aber in der autostart macht es nichts, weder Verzeichnis anlegen noch sonst etwas.
Edit:
mit folgenden Code klappt es jetzt. Vielen Dank für eure Hilfe!!!Code( cd /media/usbladen/epg; rm guide.xml; /usr/bin/wget http://epg.koditvepg.com/DE/guide.xml ) & -
syslog und message sind nicht vorhanden
-
der Befehl gibt folgenden Ausdruck
CodedmesgCode
Alles anzeigen[ 0.000000] Booting Linux on physical CPU 0xf00 [ 0.000000] Linux version 4.9.80 (chewitt@build1) (gcc version 6.2.0 (GCC) ) #1 SMP Fri Apr 13 11:08:35 BST 2018 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt:Machine model: Raspberry Pi 2 Model B Rev 1.1 [ 0.000000] cma: Reserved 8 MiB at 0x2e400000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 192512 [ 0.000000] free_area_init_node: node 0, pgdat 80c36080, node_mem_map add64000 [ 0.000000] Normal zone: 1692 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 192512 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 14 pages/cpu @aefa8000 s25292 r8192 d23860 u57344 [ 0.000000] pcpu-alloc: s25292 r8192 d23860 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 190820 [ 0.000000] Kernel command line: bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 boot=UUID=DD06-B371 disk=UUID=d26823dd-dbf9-460c-8c0a-c4f68e8e6793 quiet root=/dev/ram0 rdinit=/init BOOT_IMAGE=/kernel.img usbcore.autosuspend=-1 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 742068K/770048K available (6144K kernel code, 221K rwdata, 1380K rodata, 3072K init, 394K bss, 19788K reserved, 8192K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xaf800000 - 0xff800000 (1280 MB) [ 0.000000] lowmem : 0x80000000 - 0xaf000000 ( 752 MB) [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB) [ 0.000000] .text : 0x80008000 - 0x80700000 (7136 kB) [ 0.000000] .init : 0x80900000 - 0x80c00000 (3072 kB) [ 0.000000] .data : 0x80c00000 - 0x80c37560 ( 222 kB) [ 0.000000] .bss : 0x80c39000 - 0x80c9b9ec ( 395 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000009] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000022] Switching to timer-based delay loop, resolution 52ns [ 0.000236] Console: colour dummy device 80x30 [ 0.000254] console [tty0] enabled [ 0.000275] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000) [ 0.000292] pid_max: default: 32768 minimum: 301 [ 0.000474] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000486] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001545] Disabling memory control group subsystem [ 0.001606] CPU: Testing write buffer coherency: ok [ 0.002081] CPU0: update cpu_capacity 1024 [ 0.002091] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 [ 0.002127] Setting up static identity map for 0x100000 - 0x100034 [ 0.004664] CPU1: update cpu_capacity 1024 [ 0.004674] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 [ 0.005576] CPU2: update cpu_capacity 1024 [ 0.005585] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02 [ 0.006458] CPU3: update cpu_capacity 1024 [ 0.006467] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03 [ 0.006580] Brought up 4 CPUs [ 0.006593] SMP: Total of 4 processors activated (153.00 BogoMIPS). [ 0.006598] CPU: All CPU(s) started in HYP mode. [ 0.006602] CPU: Virtualization extensions available. [ 0.007407] devtmpfs: initialized [ 0.019757] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.020145] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.020168] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.020880] pinctrl core: initialized pinctrl subsystem [ 0.022138] NET: Registered protocol family 16 [ 0.024548] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.043526] cpuidle: using governor ladder [ 0.056902] cpuidle: using governor menu [ 0.057428] Serial: AMBA PL011 UART driver [ 0.059591] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.121824] bcm2835-dma 3f007000.dma: DMA legacy API manager at af80d000, dmachans=0x1 [ 0.124010] SCSI subsystem initialized [ 0.124391] usbcore: registered new interface driver usbfs [ 0.124483] usbcore: registered new interface driver hub [ 0.124609] usbcore: registered new device driver usb [ 0.127352] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-04-06 18:05 [ 0.128871] clocksource: Switched to clocksource arch_sys_counter [ 0.129300] FS-Cache: Loaded [ 0.144070] NET: Registered protocol family 2 [ 0.145104] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.145234] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.145421] TCP: Hash tables configured (established 8192 bind 8192) [ 0.145598] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.145655] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.145958] NET: Registered protocol family 1 [ 0.146455] RPC: Registered named UNIX socket transport module. [ 0.146463] RPC: Registered udp transport module. [ 0.146467] RPC: Registered tcp transport module. [ 0.146472] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.306681] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.323967] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.325638] FS-Cache: Netfs 'nfs' registered for caching [ 0.326819] NFS: Registering the id_resolver key type [ 0.326859] Key type id_resolver registered [ 0.326865] Key type id_legacy registered [ 0.326883] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.327265] FS-Cache: Netfs 'cifs' registered for caching [ 0.331583] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.331595] io scheduler noop registered (default) [ 0.331601] io scheduler deadline registered [ 0.331885] io scheduler cfq registered [ 0.337434] BCM2708FB: allocated DMA memory ee500000 [ 0.337468] BCM2708FB: allocated DMA channel 0 @ af80d000 [ 0.386504] Console: switching to colour frame buffer device 228x61 [ 0.417414] bcm2835-rng 3f104000.rng: hwrng registered [ 0.417527] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB) [ 0.418225] vc-sm: Videocore shared memory driver [ 0.437849] brd: module loaded [ 0.438062] loop: module loaded [ 0.443357] nbd: registered device at major 43 [ 0.458296] usbcore: registered new interface driver rtsx_usb [ 0.458308] Loading iSCSI transport class v2.0-870. [ 0.459015] iscsi: registered transport (tcp) [ 0.459664] libphy: Fixed MDIO Bus: probed [ 0.459727] tun: Universal TUN/TAP device driver, 1.6 [ 0.459733] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 0.460141] usbcore: registered new interface driver lan78xx [ 0.460214] usbcore: registered new interface driver dm9601 [ 0.460317] usbcore: registered new interface driver smsc95xx [ 0.460370] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.688538] Core Release: 2.80a [ 0.688550] Setting default values for core params [ 0.688585] Finished setting default values for core params [ 0.889041] Using Buffer DMA mode [ 0.889048] Periodic Transfer Interrupt Enhancement - disabled [ 0.889052] Multiprocessor Interrupt Enhancement - disabled [ 0.889059] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 0.889075] Dedicated Tx FIFOs mode [ 0.889557] WARN::dwc_otg_hcd_init:1032: FIQ DMA bounce buffers: virt = 0xae514000 dma = 0xee514000 len=9024 [ 0.889591] FIQ FSM acceleration enabled for : [ 0.889591] Non-periodic Split Transactions [ 0.889591] Periodic Split Transactions [ 0.889591] High-Speed Isochronous Endpoints [ 0.889591] Interrupt/Control Split Transaction hack enabled [ 0.889599] dwc_otg: Microframe scheduler enabled [ 0.889665] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x8053a680 [ 0.889676] WARN::hcd_init_fiq:460: FIQ ASM at 0x8053a9e0 length 36 [ 0.889689] WARN::hcd_init_fiq:486: MPHI regs_base at 0xaf87c000 [ 0.889755] dwc_otg 3f980000.usb: DWC OTG Controller [ 0.889801] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 0.889848] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000 [ 0.889901] Init: Port Power? op_state=1 [ 0.889905] Init: Power Port (0) [ 0.890189] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.890200] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.890209] usb usb1: Product: DWC OTG Controller [ 0.890218] usb usb1: Manufacturer: Linux 4.9.80 dwc_otg_hcd [ 0.890227] usb usb1: SerialNumber: 3f980000.usb [ 0.891236] hub 1-0:1.0: USB hub found [ 0.891289] hub 1-0:1.0: 1 port detected [ 0.892113] dwc_otg: FIQ enabled [ 0.892120] dwc_otg: NAK holdoff enabled [ 0.892125] dwc_otg: FIQ split-transaction FSM enabled [ 0.892142] Module dwc_common_port init [ 0.892487] usbcore: registered new interface driver usb-storage [ 0.892793] mousedev: PS/2 mouse device common for all mice [ 0.892994] i2c /dev entries driver [ 0.894706] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer [ 0.895045] bcm2835-cpufreq: min=600000 max=900000 [ 0.895696] sdhci: Secure Digital Host Controller Interface driver [ 0.895701] sdhci: Copyright(c) Pierre Ossman [ 0.896081] sdhost-bcm2835 3f202000.sdhost: could not get clk, deferring probe [ 0.896336] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.897107] ledtrig-cpu: registered to indicate activity on CPUs [ 0.897284] hidraw: raw HID events driver (C) Jiri Kosina [ 0.899273] usbcore: registered new interface driver usbhid [ 0.899277] usbhid: USB HID core driver [ 0.900035] vchiq: vchiq_init_state: slot_zero = 0xae580000, is_master = 0 [ 0.901516] [vc_sm_connected_init]: start [ 0.910498] [vc_sm_connected_init]: end - returning 0 [ 0.911627] NET: Registered protocol family 10 [ 0.912693] NET: Registered protocol family 17 [ 0.912797] Key type dns_resolver registered [ 0.913051] Registering SWP/SWPB emulation handler [ 0.918245] uart-pl011 3f201000.serial: cts_event_workaround enabled [ 0.918327] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2 [ 0.919896] sdhost: log_buf @ ae513000 (ee513000) [ 0.972225] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 0.972305] console [netcon0] enabled [ 0.972308] netconsole: network logging started [ 0.972312] of_cfs_init [ 0.972412] of_cfs_init: OK [ 0.976525] Freeing unused kernel memory: 3072K [ 1.084605] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.089163] mmc0: new high speed SDHC card at address aaaa [ 1.090017] mmcblk0: mmc0:aaaa SL08G 7.40 GiB [ 1.094432] mmcblk0: p1 p2 < p5 p6 p7 > [ 1.102385] Indeed it is in host mode hprt0 = 00021501 [ 1.183318] random: fast init done [ 1.275592] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 1.275755] Indeed it is in host mode hprt0 = 00001101 [ 1.465985] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ 1.466000] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.466809] hub 1-1:1.0: USB hub found [ 1.466901] hub 1-1:1.0: 5 ports detected [ 1.745586] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 1.835954] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 [ 1.835969] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.838780] smsc95xx v1.0.5 [ 1.892330] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:7c:a5:a3 [ 2.135709] usb 1-1.5: new high-speed USB device number 4 using dwc_otg [ 2.226705] usb 1-1.5: New USB device found, idVendor=0781, idProduct=5571 [ 2.226719] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.226726] usb 1-1.5: Product: Cruzer Fit [ 2.226733] usb 1-1.5: Manufacturer: SanDisk [ 2.226739] usb 1-1.5: SerialNumber: 4C530101210202100043 [ 2.227762] usb-storage 1-1.5:1.0: USB Mass Storage device detected [ 2.228412] EXT4-fs (mmcblk0p7): couldn't mount as ext3 due to feature incompatibilities [ 2.228630] scsi host0: usb-storage 1-1.5:1.0 [ 2.229080] EXT4-fs (mmcblk0p7): couldn't mount as ext2 due to feature incompatibilities [ 2.237424] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null) [ 2.781191] systemd[1]: System time before build time, advancing clock. [ 2.804812] systemd[1]: systemd 232 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 2.805348] systemd[1]: Detected architecture arm. [ 2.805758] systemd[1]: Set hostname to <LibreELEC>. [ 2.922468] systemd[1]: Listening on udev Control Socket. [ 2.923138] systemd[1]: Listening on Journal Socket. [ 2.923386] systemd[1]: Listening on Journal Socket (/dev/[definition='1','0']log[/definition]). [ 2.923693] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.923911] systemd[1]: Listening on udev Kernel Socket. [ 2.925036] systemd[1]: Created slice System Slice. [ 2.927993] systemd[1]: Starting Samba Configuration... [ 3.258762] scsi 0:0:0:0: Direct-Access SanDisk Cruzer Fit 1.00 PQ: 0 ANSI: 6 [ 3.260658] sd 0:0:0:0: [sda] 61489152 512-byte logical blocks: (31.5 GB/29.3 GiB) [ 3.263563] sd 0:0:0:0: [sda] Write Protect is off [ 3.263586] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 3.264142] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3.272892] sda: sda1 [ 3.276237] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 3.300697] systemd-journald[221]: Received request to flush runtime journal from PID 1 [ 3.896043] random: crng init done [ 4.915837] Console: switching to colour dummy device 80x30 [ 5.797836] fuse init (API version 7.26) [ 5.844381] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 5.844608] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.150126] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 7.248944] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 7.251153] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x5DE1 [ 7.294548] 8021q: 802.1Q VLAN Support v1.8 -
Vielen Dank für eure Hilfe!
Richtig, ich habe einen Raspi mit libreelec Kodi 17.6. (Entschuldigung für meine mangelnde Infos!)wget geht unter ssh prima, dein Code-Befehl funktioniert auch sehr gut, aber nur manuell. Wenn ich das unter /.config/autosart.sh ausführen lassen will, tut sich leider nichts.
-
Hallo,
nachdem ich IPTV dank den Beiträgen aus diesem Forum ans laufen bekommen habe, werkele ich an einer Lösung für EPG herum. Der RyTec Downloader funktioniert wohl nicht. Nun habe ich versuch per autostart.sh eine Lösung zu finden.Code( rm media/usbladen/epg/guide.xml; wget -P medi/usbladen/epg/ http://epg.koditvepg.com/DE/guide.xml ) &Die Datei guide.xml wird wohl gelöscht, aber heruntergeladen wir nix. Was mache ich falsch?
Vielen Dank für eure Unterstützung! -
Hallo,
danke für die Info. Habe mich an eure Anleitung gehalten - es funktioniert. Werde natürlich nur die angegeben Liste verwenden.
Gibt es eine Möglichkeit, die Regional-TV-Sender des WDR dort einzufügen? -
Vielen Dank für die netten Erklärungen. Habe zur Zeit die Liste von - illegale m3u entfernt - die Moderation -
-
Hallo,
ich beschäftige mich gerade etwas mit dem Thema IPTV mit Simple Client.
Habe unter dem Raspberry PI 2+ und Kodi 17.3 den Clienten halbwegs ans laufen bekommen. Habe aber noch ein paar Fragen, die ich in Stichworten stellen möchte:1. mit der o.g. Hardware kann ich zur Zeit "nur" SD Auflösungen empfangen, ist das normal oder wo stelle ich das um?
2. kann man die m3u Playliste noch selbst erweitern?
3. würdet Ihr Zattoo vor IPTV Simple Client vorziehen?Sage schon einmal danke für Antworten!
Viele Grüße aus dem Sauerland!