Beiträge von Srcomprador
-
-
...ich habe es so eingestellt!?
-
Da ist aber die aktuellste Firmware drauf!!?
Wie oben beschrieben!! -
Ja, ich glaub's nicht, Letzteres hat tatsächlich geklappt!!!
Bin leider erst heute Abend zum Ausprobieren gekommen!
Vielen Dank an CvH !! -
QNAP-NAS TS-231P2
4.3.3.0378 Build 201711 -
Verstehe ich jetzt nicht genau!?
Wetek Play mit neuestem LE, darauf TVH Server 4.2
Aufnahmen sollen auf ein QNAP-NAS TS-231P2 gehen -
Nein, leider wieder kein Erfolg, ich weiss nicht mehr weiter !?
-
Sitze an einem Linux Fedora Rechner und habe gerade 10.2GB nach dahin verschoben !
-
-
okay werde ich heute Abend ausprobieren!
Danke! -
Hallo CvH,
hab's versucht, hat aber leider nicht geklappt!
Immer noch das gleiche Phänomen !? -
Hier der Inhalt:
# This is a sample service script to mount CIFS/SAMBA shares.
# Please read carefully the comments in this file. For production usage
# you can remove all comments (lines beginning with "#") from this file.[Unit]
# The description should be used to explain what this servicefile is for
Description=cifs mount script# if we do network mounts like here we *require* 'network-online.service'
# which checks if the network is online
Requires=network-online.service# our scripts must start *after* 'network-online.service', on timeout and if
# 'network-online.service' fails we can not mount and this scripts fails too
After=network-online.service# usually we mount networks shares because we want they avaible *before* XBMC starts.
# so XBMC has access to this mounts from beginning. Note: this slows down the boot!
Before=kodi.service[Mount]
# The share we want mount
What=//192.168.178.56/Multimedia/Recordings# Where we want mount this share
Where=/storage/recordings# Any options you usually use with the "-o" parameter in the mount command
Options=username=User,password=xxxxxxxxx,rw# filesystem type
Type=cifs[Install]
# The target is used by 'systemctl enable <name_of_this_file.mount>' to link
# this service to a runlevel for starting on boot. usually 'multi-user.target'
# is ok here.
WantedBy=multi-user.target# Important:
# this file must be renamed to <mountpoint>.mount where <mountpoint>, is the FULL path
# where the share will be mounted but slashes "/" MUST BE REPLACED with dashes "-" with .mount
# as extension.
# This means, if we want mount to "/storage/music2" (see above "Where=/storage/music2")
# then this file must be renamed to 'storage-music2.mount' and can be enabled via ssh with the
# command 'systemctl enable storage-music2.mount' -
/storage/recordings/
gemountet mit storage-recordings.mount Datei !
Und ich habe folgende [definition='1','0']log[/definition] outputs:
dvr: Unable to change directory permissions to "775" for "/storage/recordings/Der geheime U-Boot-Krieg" (keeping "755")
pass: /storage/recordings/Der geheime U-Boot-Krieg/Der geheime U-Boot-Krieg-ZDFinfo HD2017-11-2821-00.ts: Write failed -- File too large -
okay mach ich, das geht nur nicht jetzt gleich, da ich nicht daheim bin, sorry!
-
Ja, ich denke schon, da ich geputzt habe und jetzt 1,5 TB frei sind !
-
Hi SkyBird1980,
aber das verstehe ich nicht, da ich einen Linux Server für die Aufnahmen betreibe,
und der mit ext3 bzw. ext4 formatiert ist!?
Und vor dem neuesten LE update, hat das einwandfrei funktioniert !? -
Hallo Zusammen,
ich bräuchte bitte Hilfe!?
Seit dem update auf LE 8.2.1 auf meiner WETEK PLAY kann ich mit TVHeadend Server 4.2 nur noch Aufnahmen von 2147 MB machen auf mein LINUX NAS!?
Die Aufnahmeanzeige läuft zwar weiter, aber die Aufnahme bricht ab bei 2147 MB mit
pass: ..... write failed file too largeMeisten bei HD Aufnahmen!
Kann mir da jemand bitte helfen, oder kennt das schon jemand !?
Ich komme nicht auf die Lösung!?Grüsse
Srcomprador