problem creating m3u list in tvheadend/oscam.

  • hi,
    I the problem creating m3u list in tvheadend/oscam.
    i have working oscam installation (virmin/cable).
    some parts of the oscam is -

    oscam.conf
    [newcamd]
    port = **@1841:000000
    key = 0102030405060708091011121314
    keepalive = 1

    [dvbapi]
    enabled = 1
    au = 1
    boxtype = pc
    user = tvh
    pmt_mode = 4
    request_mode = 1
    listen_port = 9000

    oscam.user
    [account]
    user = tvh
    pwd = 568531
    group = 6
    au = 1

    configuration in TVHeadend :
    configuration > CAs > Add > Type : CAPMT > then ..
    OSCam net protocol (rev >= 10389)
    127.0.0.1
    port : 9000
    TVH [definition='1','0']log[/definition] shows capmt client is connected in mode 5

    oscam live [definition='1','0']log[/definition] shows :
    2018/03/06 21:17:12 336682D6 c (dvbapi) Client connected: 'Tvheadend 4.2.5-43~ga2fab13' (protocol version = 2)

    so tvheadend is connected.
    This means part 1 is done. Now I need to do the network/mux/mapping....etc so that i can create the m3u list.

    i searched google/forums, everyone is discussing about the part 1 only. i did not find any solution on how to do the network/mux/mapping ..... etc.
    network things are in dvp inputs/adapter/network/..... but there is no adapter in my dvb inputs sections (because i used the CA instead of physical tuners).
    Also i wrote about this in the forum before 2 days, but nobody replied. i do not have good knowledge about this.
    is it really possible to do that ?
    Can you please give me some help.
    thanks.

  • I think you got something seriously wrong here?
    How do you want to tune a program without a physical tuner?
    The CA does not provide you an TV Stream or something like that.

    Think you should be informed a bit better before kicking off something like this. Also this is a german forum, dont expect anybody to know how virmin (whatever that is) distribute it TV Signal.

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!